PERFORMANCE DATA:
1) Temperature and the working environment (temperature): -40 ºC ~ +80 ºC (non-chemical gas space)
Fluid temperature range: -15 ºC ~ +60 ºC (not ice over)
2) Diameter tolerance: ± 0.1mm ~ ± 0.15mm
3) Hardness: Shores 95A / 98A (according to season and region)
4) Tensile strength: 400kgf/cm2 (5690 PSI)
5) Elongation limit: 490-590%
6) Resistant to wear and tear of: 35mg
7) Tear strength: 110kg/cm2 (1565 PSI)
8) Blasting pressure and the pressure to work long hours for the safety factor ratio: 3:1
9) Minimum bending angle:
3 * 2-12 ºC 4 * 2.5-12 ºC 5 * 3-33 ºC 6 * 4-35 ºC 8 * 5-39 ºC 8 * 5.5-46 ºC 10 * 6.5-43.5 ºC 10 * 7.5-42 ºC 12 * 8-37 ºC 12 * 9.5-54 ºC 14 * 10-70 ºC 16 * 12-70 ºC
SUPERIOR FEATURES:
• excellent flexibility.
• bend radius less resistance around the song.
• a high elastic recovery memory effect.
• resistant to wear and tear, impact.
• part of the resistance can not corrosive chemicals and oils.
• negotiable flammable objects, can weld.
• 100% incineration. approved by scientific Eoology Group.
BURST TEST.HYDROSTATIC WATER PRESSURE75°F&140°F
75°F&140°F
Note: Safety Factor between BP and WP:3:1
MATERIAL DESCRIPTION:
Thermoplastic resin-amino acid (commonly known as TPU) is contained by the NCO functional groups of MDI and contain OH functional groups of polyol, extending from the mixing of extrusion, with amino acid lipid gene polymers.
NOTES FOR INSTALLATION AND UTILIZATION PU TUBING:
1,Ensure that PU tube O.D and I.D should be fit to the standard size marked on the pipe.The hose wall thickness on the cross-section of PU cutting should be meet the standard with the number marked on the pipe.The calculating methodology of wall thickness (O.D - I.D) / 2 = wall thickness,the standard error is based on the National's standard.
2, Please test before proceed with an installation,to ensure the wall thickness on the cross-section whether it is smooth after cutting?Otherwise,it should be tested as if there is error being found out of the standard.
3, Please check it before proceed with an installation,please don't proceed with any installation or use it if there is bubble,or black point
1) Temperature and the working environment (temperature): -40 ºC ~ +80 ºC (non-chemical gas space)
Fluid temperature range: -15 ºC ~ +60 ºC (not ice over)
2) Diameter tolerance: ± 0.1mm ~ ± 0.15mm
3) Hardness: Shores 95A / 98A (according to season and region)
4) Tensile strength: 400kgf/cm2 (5690 PSI)
5) Elongation limit: 490-590%
6) Resistant to wear and tear of: 35mg
7) Tear strength: 110kg/cm2 (1565 PSI)
8) Blasting pressure and the pressure to work long hours for the safety factor ratio: 3:1
9) Minimum bending angle:
3 * 2-12 ºC 4 * 2.5-12 ºC 5 * 3-33 ºC 6 * 4-35 ºC 8 * 5-39 ºC 8 * 5.5-46 ºC 10 * 6.5-43.5 ºC 10 * 7.5-42 ºC 12 * 8-37 ºC 12 * 9.5-54 ºC 14 * 10-70 ºC 16 * 12-70 ºC
SUPERIOR FEATURES:
• excellent flexibility.
• bend radius less resistance around the song.
• a high elastic recovery memory effect.
• resistant to wear and tear, impact.
• part of the resistance can not corrosive chemicals and oils.
• negotiable flammable objects, can weld.
• 100% incineration. approved by scientific Eoology Group.
BURST TEST.HYDROSTATIC WATER PRESSURE75°F&140°F
75°F&140°F
Note: Safety Factor between BP and WP:3:1
O.D(mm) | I.D(mm) | Burst pressure kgf/cm2 @ 20ºC | Burst pressure kgf/cm2 @ 60ºC | Burst PSI @ 75°F | Burst PSI @ 140°F | |||||
| 3 | 2 | 34 | 19 | 435 | 270 | |||||
| 4 | 2.5 | 38 | 21 | 492 | 305 | |||||
| 5 | 3 | 37 | 21 | 480 | 297 | |||||
| 6 | 4 | 31 | 17 | 401 | 251 | |||||
| 8 | 4 | 48 | 25 | 633 | 363 | |||||
| 8 | 5 | 32 | 19 | 414 | 268 | |||||
| 8 | 5.5 | 28 | 16 | 365 | 219 | |||||
| 8 | 6 | 21 | 11 | 295 | 162 | |||||
| 10 | 6.5 | 31 | 18 | 392 | 286 | |||||
| 10 | 7.5 | 26 | 15 | 335 | 216 | |||||
| 12 | 8 | 31 | 17 | 405 | 248 | |||||
| 12 | 9.5 | 24 | 14 | 313 | 203 | |||||
| 14 | 10 | 20 | 11 | 255 | 159 | |||||
| 16 | 12 | 17 | 10 | 216 | 135 | |||||
| 16 | 11 | 24 | 14 | 315 | 205 | |||||
| 1/8" | 0.066" | 43 | 24 | 585 | 355 | |||||
| 3/16" | 0.188" | 35 | 19 | 455 | 275 | |||||
| 1/4" | 0.17" | 34 | 15 | 435 | 210 | |||||
| 3/8" | 1/4" | 31 | 17 | 408 | 252 | |||||
| 1/2" | 0.32" | 34 | 17 | 438 | 242 | |||||
MATERIAL DESCRIPTION:
Thermoplastic resin-amino acid (commonly known as TPU) is contained by the NCO functional groups of MDI and contain OH functional groups of polyol, extending from the mixing of extrusion, with amino acid lipid gene polymers.
NOTES FOR INSTALLATION AND UTILIZATION PU TUBING:
1,Ensure that PU tube O.D and I.D should be fit to the standard size marked on the pipe.The hose wall thickness on the cross-section of PU cutting should be meet the standard with the number marked on the pipe.The calculating methodology of wall thickness (O.D - I.D) / 2 = wall thickness,the standard error is based on the National's standard.
2, Please test before proceed with an installation,to ensure the wall thickness on the cross-section whether it is smooth after cutting?Otherwise,it should be tested as if there is error being found out of the standard.
3, Please check it before proceed with an installation,please don't proceed with any installation or use it if there is bubble,or black point